Hot Sale 1306 1314 13220 Rolling Bearing Self-Aligning Ball Bearing

• Customization: Available
• ISO: 9001
• Aligning: Aligning Bearing
• Model NO.: 1306
• Separated: Unseparated
• Rows Number: Multiple
• Load Direction: Thrust Bearing
• Material: Bearing Steel
• Transport Package: Standard Export Packaging
• Specification: gcr15
• Trademark: WHB
• Origin: China
• HS Code: 8482
• Production Capacity: 1000000

Product Description

Product Description

 

What is different about self-aligning bearings vs. basic bearings?

In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.

Paul Brda, Application Engineer, NSK Americas explains, "Whereas a ball bearing only has one raceway groove on both the inner and outer ring and is the most common type of rolling bearing."

Why would you choose to use self-aligning bearings?

Self aligning bearing cut-away image

A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.

Can they interchange with standard ball bearing assemblies?
Depending on the series, most self-aligning bearings can be interchanged with standard ball bearing assemblies. (6200 and 6300 have direct interchanges with the 1200 and 1300 series). "However, if this is not possible, the self-aligning bearing may be wider or can have a tapered bore," Brda explains.

Selection and Installation tips

According to Brda, the bearing would be selected based on the load, speed and space constraints of the application. Also, the misalignment and/or shaft bending amount should be considered when specifying bearing type.

Normal mounting and handling procedures for a cylindrical bore bearing should be followed. For the tapered bore, special care must be taken to ensure the bearing is driven up the taper the appropriate amount. Because matching the bearing to the specific application is critical, it is important to verify your application need with your selected vendor

 

Series

108 126 196 1200 1300 2200 2300

 

GNYAR MODEL		Dimension			KN		r/min		Weight kg
10000 (TN1,M)	10000K (KTN1,KM)	d	D	B	Cr	Cor	Grease	Oil
135		5	19	6	2.5	0.55	32000	38000	0.009
196(V6)		6	15	5	1.6	0.4	31000	37000	0.006
126			19	6	2.5	0.55	32000	38000	0.009
127		7	22	7	2.7	0.65	30000	36000	0.014
108		8	22	7	2.7	0.65	30000	36000	0.014
129		9	26	8	3.9	0.95	26000	32000	0.022
1200	1200K	10	30	9	5.48	1.20	24000	28000	0.035
2200	2200K		30	14	7.12	1.58	24000	28000	0.050
1300	1300K		35	11	7.22	1.62	20000	24000	0.060
2300	2300K		35	17	11.0	2.45	18000	22000	0.090
1201	1201K	12	32	10	5.55	1.25	22000	26000	0.042
2201	2201K		32	14	8.80	1.80	22000	26000	0.059
1301	1301K		37	12	9.42	2.12	18000	22000	0.070
2301	2301K		37	17	12.5	2.72	17000	22000	0.104
1202	1202K	15	35	11	7.48	1.75	18000	22000	0.051
2202	2202K		35	14	7.65	1.80	18000	22000	0.06
1302	1302K		42	13	9.50	2.28	16000	22000	0.1
2302	2302K		42	17	12.0	2.88	14000	18000	0.11
1203	1203K	17	40	12	7.90	2.02	16000	20000	0.076
2203	2203K		40	16	9.00	2.45	16000	20000	0.09
1303	1303K		47	14	12.5	3.18	14000	17000	0.14
2303	2303K		47	19	14.5	3.58	13000	16000	0.17
1204	1204K	20	47	14	9.95	2.65	14000	17000	0.12
2204	2204K		47	18	12.5	3.28	14000	17000	0.15
1304	1304K		52	15	12.5	3.28	12000	15000	0.17
2304	2304K		52	21	17.8	4.75	11000	14000	0.22
1205	1205K	25	52	15	12.0	3.30	12000	14000	0.14
2205	2205K	25	52	18	12.5	3.40	12000	14000	0.19
1305	1305K		62	17	17.8	5.05	10000	13000	0.26
2305	2305K		62	24	24.5	6.48	9500	12000	0.35
1206	1206K	30	62	16	15.8	4.70	10000	12000	0.23
2206	2206K		62	20	15.2	4.60	10000	12000	0.26
1306	1306K		72	19	21.5	6.28	8500	11000	0.398
2306	2306K		72	27	31.5	8.68	8000	10000	0.50
1207	1207K	35	72	17	15.8	5.08	8500	10000	0.32
2207	2207K		72	23	21.8	6.65	8000	10000	0.44
1307	1307K		80	21	25.0	7.95	7500	9500	0.54
2307	2307K		80	31	39.2	11.0	7100	9000	0.68
1208	1208K	40	80	18	19.0	6.95	8500	10000	0.42
2208	2208K		80	23	31.9	10	7500	9000	0.51
1308	1308K		90	23	33.8	11.2	6700	8000	0.72
2308	2308K		90	33	54.0	16.0	6300	7500	0.93
1209	1209K	45	85	19	22.9	7.8	7500	9000	0.47
2209	2209K		85	23	32.5	10.6	7000	8500	0.55
1309	1309K		100	25	39.0	13.4	6300	7500	0.96
2309	2309K		100	36	63.7	19.3	5600	6700	1.25
1210	1210K	50	90	20	26.5	9.15	7000	8500	0.53
2210	2210K		90	23	33.8	11.2	6300	7500	0.60
1310	1310K		100	27	43.6	14.0	5600	6700	1.2
2310	2310K		100	40	63.7	20.0	5300	6300	1.65

 

GNYAR                 MODEL		Dimension mm			KN		r/min	Weight kg
10000 (TN1,M)	10000K (TN1,M)	d	D	B	Cr	Cor	Oil
2200-2RS	2200-2RSK	10	30	14	5.53	1.18	17000	0.048
2201-2RS	2201-2RSK	12	32	14	6.24	1.43	16000	0.053
2202-2RS	2202-2RSK	15	35	14	7.41	1.76	14000	0.058
2302-2RS	2202-2RSK		42	17	10.8	2.6	12000	0.11
2203-2RS	2203-2RSK	17	40	16	8.84	2.2	12000	0.089
2303-2RS	2303-2RSK		47	19	12.7	3.4	11000	0.16
2204-2RS	2204-2RSK	20	47	18	12.7	3.4	10000	0.14
2304-2RS	2304-2RSK		52	21	14.3	4.0	9500	0.21
2205-2RS	2205-2RSK	25	52	18	14.3	4.0	9000	0.16
2305-2RS	2305-2RSK		62	24	19.0	5.4	7500	0.34
2206-2RS	2206-2RSK	30	62	20	15.6	4.65	7500	0.26
2306-2RS	2306-2RSK		72	27	22.5	6.8	6700	0.51
2207-2RS	2207-2RSK	35	72	23	19.0	6.0	6300	0.41
2307-2RS	2307-2RSK		80	31	26.5	8.5	5600	0.70
2208-2RS	2208-2RSK	40	80	23	19.9	6.95	5600	0.50
2308-2RS	2308-2RSK		90	33	33.8	11.2	5000	0.96
2209-2RS	2209-2RSK	45	85	23	22.9	7.8	5300	0.53
2309-2RS	2309-2RSK		100	36	39.0	13.4	4500	1.3
2210-2RS	2210-2RSK	50	90	23	22.9	8.15	4800	0.57
2310-2RS	2310-2RSK		110	40	43.6	14.0	4000	1.65

 

GNYAR MODEL	(mm)					KN		r/min	kg
(TN1,	d	D	B	D2	C	Cr	Cor	oIL
11204	20	47	14	28.9	40	12.7	3.4	9000	0.18
11205	25	52	15	33.3	44	14.3	4.0	8000	0.22
11305		62	17	38	48	19.0	5.4	6700	0.41
11206	30	62	16	40.1	48	15.6	4.65	6700	0.35
11306		72	19	45	52	22.5	6.8	5600	0.61
11207	35	72	17	47	52	19.0	6.0	5600	0.54
11307		80	21	51.7	56	26.5	8.5	5000	0.81
11208	40	80	18	54	56	19.9	6.95	5000	0.72
11308		90	23	61.4	58	33.8	11.2	4500	1.10

Packaging & Shipping